Fintech japan

Japanese　

English

Chinese

Korean

German

　　　Mainly provides heater products and technologies of the following categories.

Hotblast heating	Capable of hot blast heating to about 800℃.	Demonstration video
	Probably the friendliest heating means of the broadest application.
	The principle is only to supply air or the like and to blow it out after electrically heating it. Simple, stable, safe, clean, high performance and ultra-compact.
	Abundant achievements in various fields such as contact-free soldering.

Optical heating	Condenses light from a halogen lamp and is capable of heating to about 1200℃.	Demonstration video
Optical heating	Optimum for clean high-temperature heating in fields for which hot blast is inconvenient or incapable. Provides the following features compared to hot blast heating. Advantage → Capable of heating specimens in a vacuum, as direct heating is made without thermal media. There is no case where the heating object is blown off by wind. Disadvantage → Whether the heating object is acceptable or not tends to become a problem, the equipment size is large and prices are high.


Kobe Head Office Research and development, production of special products	Himeji Works Order acceptance management, production of standard products
-> Direction Sakuragaoka-Higashi-machi 1-13-5, Nishi-ku, Kobe City Postal code 651-2225 　 TEL. +81-78-995-1774 　FAX. +81-78-995-2929 　E-mail: kobe@fintech.co.jp 〒651-2225 　神戸市西区桜が丘東町1-13-5 TEL 078-995-1774 FAX 078-995-2929	-> Direction Urakawa Bldg., 2F, Higashi-Imajuku 3-1-25, Himeji City Postal code 670-0056 　 TEL. +81-792-99-2777 　 FAX. +81-792-99-2777 　E-mail: himeji@fintech.co.jp 　〒670-0056 姫路市東今宿3-1-25浦川ビル2F 　 TEL 0792-99-2777 FAX 0792-99-2777

You will be able to perform simple experiments and data acquisition using various heaters at
our Himeji Factory. If you are unable to visit our works, we will lend out samples.

Ｉntroduction to manufacturing shop, production technology and equipment (photo, video)

A drawing printing function is not provided in particular. But each drawing can be printed using a basic
function of Windows. Right-click the mouse on a drawing and select “Print the image”.

Lines of drawings may be deviated to a minor extent because of the relation with resolution. If you need
drawings of high resolution, please let us know.

asada@fintech.co.jp

Our products are often used as key components of large production lines. We are producing products at
two different places, even if we are only a small company, knowing that such a scheme is of inferior
efficiency, because of this reason.

With this scheme we are capable of supplying products reliably even if unexpected contingency may
arise. Further more, even though we are producing products to orders, we have a good stock of
parts to deal with orders of a short delivery time.

Kindly give your opinions and comments to the creator of this site at

asada@fintech.co.jp

Retailers willing to associate with us are wanted.